Comparison of two methods for obtaining degradation half-lives

Given the paucity of experimental degradation half-life data for most organic chemicals, there is a compelling incentive to use available estimation software when undertaking assessments of chemical persistence and mass balance modeling studies. In this study, half-life data obtained from estimation software for a set of 233 organic chemicals in air, water, soil and sediments were shown to differ significantly from half-life data listed in handbooks. It is suggested that the widely available and used estimation software, EPIWIN (Estimations Program's Interface for Windows), overestimates the reactivity of persistent organic pollutants (POPs). Reasons for this overestimation are explored. It is concluded that the maximum "default half-life values" used by the EPIWIN software are too short for estimating half-lives of highly persistent chemicals such as PCBs. There is a need for estimation software such as EPIWIN to be more thoroughly calibrated against experimental derived half-life data for a wide range of chemicals, including potential POPs, thus improving their reliability.     

Can social psychological models be used to promote bicycle helmet use among teenagers? A comparison of the Health Belief Model, Theory of Planned Behavior and the Locus of Control

PROBLEM: The bicycle helmet use rate is still low among teenagers despite the cumulating evidence that bicycle helmets can prevent cyclists from serious injuries and death. The objective of this study was to investigate the usefulness of the Health Belief Model (HBM; Health Education Monographs, 2 (1974) (1), Theory of Planned Behavior (TPB; Ajzen, I. (1988). Attitudes, personality and behavior. Open University Press, Milton Keynes) and Locus of Control model (LC; Psychological Monographs, (1966) (80) in understanding the intention to use bicycle helmet use among bicycle helmet owners. METHOD: Data were collected at two schools in Helsinki, Finland. Students (N=965) completed a questionnaire including three social psychological models applied to helmet use. Models were compared by structural equation modeling techniques. SUMMARY: Results showed that the TPB and LC model fitted the data well, whereas fit of the HBM model was lower than the fit of TPB and LC models. All components of TPB and external LC orientation were significantly related to the intention to use a helmet. TPB together with LC model provide a promising theoretical framework for helmet use promotion campaigns. Practical suggestions for future bicycle helmet campaigns were provided.     

Sanitary aspect of using partially treated landfill leachate as a water source in green waste composting

Shredded green wastes were composted in windrows, at the Harewood Whin landfill, near the city of York, in West Yorkshire, UK. Landfill leachate were added twice during the second and fourth week of the process in two piles. One pile was turned once every week for eight weeks and the other was turned twice, during the same period. Each time approximately, 2 m3 of leachate was added, into each pile. The two piles each contained about 45 m3 of shredded green waste. The effect of adding leachate on the sanitisation of the green waste during composting, was evaluated based on the changes in the levels of faecal coliforms and faecal streptococci. The results suggested that using leachate as the moisture source had no significant effect (tested with two factors ANOVA test) on the sanitisation process when compared with two similar piles, used as the control, for which tap water was used for moisture addition. In all four piles sanitisation was almost complete and below the acceptable levels. Additionally, the results indicated that there was no significant effect on the sanitisation process of the turning frequency.     

An estimation of the social costs of landfill siting using a choice experiment

This paper examines public preferences on siting landfills using a choice experiment. A choice experiment is a method that elicits public preferences directly through questionnaires. This paper focuses on possible negative effects of a hypothetical landfill siting on residents who are assumed to live around the landfill. The results of this analysis clearly show that the residents evaluate accepting waste originating from outside their community quite negatively, especially industrial waste originating from the Tokyo Metropolitan Area. Large external costs also are seen for siting landfills near areas that are sources of drinking water. In addition, the results show that the NIMBY syndrome of the residents weakens as the hypothetical landfill site is farther away. Considering three hypothetical siting plans, external costs based on public preferences are estimated. The social costs, which are the sum of the private costs and external costs, are then calculated. The results of the case study indicate that the option with the lowest private cost it is not always the option with the lowest social cost.     

Modeling of non-reactive solute transport in fractured clayey till during variable flow rate and time

Fractures and biopores can act as preferential flow paths in clay aquitards and may rapidly transmit contaminants into underlying aquifers. Reliable numerical models for assessment of groundwater contamination from such aquitards are needed for planning, regulatory and remediation purposes. In this investigation, high resolution preferential water-saturated flow and bromide transport data were used to evaluate the suitability of equivalent porous medium (EPM), dual porosity (DP) and discrete fracture/matrix diffusion (DFMD) numerical modeling approaches for assessment of flow and non-reactive solute transport in clayey till. The experimental data were obtained from four large undisturbed soil columns (taken from 1.5 to 3.5 m depth) in which biopores and channels along fractures controlled 96-99% of water-saturated flow. Simulating the transport data with the EPM effective porosity model (FRACTRAN in EPM mode) was not successful because calibrated effective porosity for the same column had to be varied up to 1 order of magnitude in order to simulate solute breakthrough for the applied flow rates between 11 and 49 mm/day. Attempts to simulate the same data with the DP models CXTFIT and MODFLOW/MT3D were also unsuccessful because fitted values for dispersion, mobile zone porosity, and mass transfer coefficient between mobile and immobile zones varied several orders of magnitude for the different flow rates, and because dispersion values were furthermore not physically realistic. Only the DFMD modeling approach (FRACTRAN in DFMD mode) was capable to simulate the observed changes in solute transport behavior during alternating flow rate without changing values of calibrated fracture spacing and fracture aperture to represent the macropores.     

Co-composting of paper mill sludge and hardwood sawdust under two types of in-vessel processes

Recycling of organic residues by composting is becoming an acceptable practice in our society. Co-composting dewatered paper mill sludge (PMS) and hardwood sawdust, two readily available materials in Canada, was investigated using uncontrolled and controlled in-vessel processes. The composted materials were characterized for total C and N, water-soluble, acid-hydrolyzable, and non-hydrolyzable N, extractable lipids, and by Fourier Transform Infrared (FT-IR) spectrophotometry. In the controlled scale process, the loss of organic matter was approximately 65% higher than in the uncontrolled process. After undergoing initial fluctuations in N fractions during the first two days of composting, by the end of the process, concentrations of water-soluble N decreased while those of acid-hydrolyzable and nonhydrolyzable N increased in the controlled process, whereas in the uncontrolled process, water-soluble N increased, but N in the other two fractions decreased continuously, indicating that the biochemical transformations of organic matter were not completed. Data on extractable lipids and FT-IR spectra suggest that the compost produced from the controlled process was bio-stable after 14 days, while the uncontrolled process was not stabilized after 18 days. In addition, FT-IR data suggest the biological activity during composting centered mainly on the degradation of aliphatic structures while aromatic structures were preserved. The co-composting of the PMS and hardwood sawdust can be successfully achieved if aeration, moisture, and bio available C/N ratios are optimized to reduce losses of N.     

Emissions from indoor dust inhibit proliferation of A549 cells and TNFalpha release from stimulated PBMCs

Dust accumulating on hot indoor surfaces, e.g., heaters and light fixtures, are likely to emit chemicals when heated. Using in vitro techniques we have investigated biological effects of extracts from such emissions from three indoor and two outdoor dust samples heated at 50-250 degrees C. The cell cultures were a lung epithelial cell line (A549) and primary immune cells [peripheral blood mononuclear cell (PBMCs)]. We found that a 24-h incubation with extracts generated at 200 degrees C or higher inhibit both proliferation and mitochondrial activity of the epithelial cells. At non-cytotoxic concentrations, the extracts generated at 100 degrees C or higher inhibit the release of the pro-inflammatory cytokine tumor necrosis factor-alpha (TNFalpha) from lipopolysaccharide-stimulated PBMCs. The results imply that temperatures relevant for surfaces of equipment in the indoor environment cause emissions from dust that may have an impact on indoor air quality and affect the respiratory health of building occupants.     

Mass loading of nickel and uranium on plant surfaces: application of laser ablation-ICP-MS

Transport of contaminated sediments from a former radiological settling pond results in the deposition of U and Ni in the Lower Tims Branch (LTB)(Aiken, SC, USA). Uranium is unavailable for plant uptake, but elevated U and Ni concentrations associated with foliage of understory plants suggested mass loading. Mass loading of contaminated soil on Andropogon elliottii Chapman (Poaceae) was investigated using laser ablation inductively coupled plasma mass spectrometry (LA-ICP-MS). The technique allows for rapid quantitative elemental depth profiling. Fresh washed and unwashed leaves (n= 5) from the contaminated area were compared with those from an uncontaminated area, analysing Ni and U at ten randomly chosen points on each leaf. Nickel and U concentrations differed significantly between washed and unwashed leaves from LTB. Particles on unwashed leaves measured up to 300 [micro sign]m in diameter, and were enriched with U. Uranium was detected on the surface of the leaf, whereas Ni was detected within leaf tissues. In unwashed LTB leaves, Ni and U concentrations did not significantly differ in areas with and without visible particles, suggesting that there were much smaller particles, indistinguishable at [times]100 magnification, which contributed to the overall metal burden. Washing removed the majority of the Ni and U on the surface, but residual U and Ni was detected. Irregularities in the leaf surface, such as scars from herbivory contained elevated U concentrations despite a washing step, presumably from trapping soil particles. Laser ablation ICP-MS revealed that mass loading makes a significant contribution to the contaminant burden of understory plants at LTB.     

Heavy metal distribution and controlling factors within coastal plain sediments, Bells Creek catchment, southeast Queensland, Australia

Bells Creek catchment in southeast Queensland (Australia) is a non-industrialised coastal plain limited to small settlements and agricultural land. A study was initiated to examine elevated metal concentrations and to assess horizontal and vertical distribution of those elements. Ninety-nine samples were analysed for Cr, V, Ni, Cu, Zn, Pb, As, Fe, Mn and Al. Total organic carbon, sulfur content and mineralogy of samples along with land-use practices across the catchment were used to identify processes which influence metal distribution. A comparison between metal concentration within the study area and mean heavy metal content of standard sandstone showed that except for Mn, all other metals showed elevated levels throughout the catchment. When metal concentrations were compared to parent bedrock, however, it was concluded that elevated levels are likely to be natural. A normalisation procedure was applied to the data set and this analysis validated that elevated trace metal concentrations in most samples are not due to artificial contamination. While surficial estuarine sediments were only enriched in V, soils were dominantly enriched in Cr, Zn and V. Overall, geochemistry and mineralogy of the samples show the effect of both natural and anthropogenic inputs to the catchment, however, natural processes are more dominant than anthropogenic inputs in concentrating metals.     

Market basket study on dietary intake of PCDD/Fs, PCBs, and PBDEs in Finland

We have measured the concentrations of polychlorinated dibenzo-p-dioxins (PCDD/F), polychlorinated biphenyls (PCBs), and polybrominated diphenyl ethers (PBDE) in 10 market baskets consisting of almost 4000 individual food samples representing 228 different food items, and also in the total diet basket. Lower bound concentrations of PCDD/Fs ranged between 0.0057 and 5.6 pg/g fresh weight in the market baskets and the corresponding values for PCBs from 39 to 25,000 pg/g. The fish basket contributed most to the concentrations of dioxins and PCBs, and also to concentrations of PBDEs in which the lower bound range was from 0.82 to 850 pg/g. We also assessed the average daily intakes of these substances by the Finnish adult population. The average daily intake of sum of PCDD/Fs and PCBs as WHO toxic equivalents was assessed to be 115 pg, which was 1.5 pg WHO-TEq/kg body weight using an average mean weight of 76 kg for the general population in Finland. The contribution of fish to the intake of PCDD/Fs was between 94% and 72%, depending on whether lower or upper bound concentrations were used. With respect to PCBs, the contribution of fish was 80%. The calculated intake of PBDEs of 44 ng/day was comparable to intake assessments from other countries. Fish also contributed most to the PBDE intake, but there was some other source of PBDEs that distinguishes the exposure to PBDEs from exposure to PCDD/Fs and PCBs. This additional source seemed to be found in the market basket that included beverages, spices, and sweets.